1、光纖傳感器結構原理 以電為基礎的傳統傳感器是一種把測量的狀態轉變?yōu)榭蓽y(cè)的電信號的裝置。它的電源、敏感元件、信號接收和處理系統以及信息傳輸均用金屬導線連接,見圖(a)。光纖傳感器則是一種把被測量的狀態轉
多臺電機獨立控制 控制要求: 為兩臺異步電動機設計一個控制線路,其要求如下: (1)兩臺電動機互不影響地獨立工作; (2)能同時控制兩臺電動機的起動與停止; (3)當一臺電動機發生故障時,兩臺電動
直流電動機控制電路-DC Motor Control CircuitNotes: Here, S1 and S2 are normally open , push to close, press button switches. The diodes can be red or green and are there only to indicate direction
音量指示器--Sound Level IndicatorThis project uses an LM3915 bar-graph IC driving two sets of ten LEDs for a 30dB range. The circuit is unique because it has an additional range of 20dB provided by an
簡單伺服測試儀電路--Simple Servo Testerclick here to download schematic in pdfThis is a simple servo tester which will comprehensively test the capabilities of almost any modern servo. It has two push
風扇控制器電路-Fan controlThis is a simple circuit that will do what you want I believe. R1 15k ohm resistor NTC Thermistor- 10k ohm, sold at Radio Shack in the states. P1 10k ohm potentiometer -
可調頻閃燈電路--Adjustable Strobe LightThis one uses a much more powerful "horse shoe" Xenon tube which produces more light. You can also control the flash rate up to about 20Hz. Do not look
單極性步進電機控制器電路--Unipolar Stepper Motor ControllerThis is a very good integrated circuit. There is no need for any external glue logic to drive the circuit, there is only 2 pins to drive the
PWM馬達/燈控制器電路-PWM Motor/Light ControllerA pulse width modulator (PWM) is a device that may be used as an efficient light dimmer or DC motor speed controller. The circuit described here is a gen
黑光發生器電路 Black Light This circuit is a simple ultraviolate light that can be powered by a 6 volt battery or power supply that is capable of supplying 1 or more amps. Theoritical DiagrammPARTSP