microchip公司的CAN LIN CAN-FD汽車網絡開發板采用8位,16位和32位Microchip MCU系列,提供低成本模塊化平臺,用于CAN, LIN, CAN-FD網絡開發.具有四個mikroBUS™插座,支持CAN和CAN-FD. 7-30V DC電源輸入給整個板提供+3.3V和+5V穩壓電源.本文介紹了汽車網絡開發板主要特性,框圖和電路圖.

The CAN, LIN, CAN-FD AutomoTIve Networking Development Board provides alow-cost modular platform for CAN, LIN, CAN-FD network development using 8-bit,16-bit, and 32-bit Microchip microcontroller families. It features four mikroBUS™headers to accommodate a variety of plug-in Click™ Board combinaTIons for LIN, CAN,and CAN-FD development. The AutomoTIve Networking Development Board supportsCAN and CAN-FD naTIvely. The CAN digital connection from the microcontrollerconnects to the TX/RX connection on the mikroBUS™ header. This connectionsupports the CAN and CAN-FD Transceiver Click™ boards without having to lose themicrocontroller UART connection to the other mikroBUS™ headers.
 

圖1.汽車網絡開發板外形圖

The board includes the key features mentioned below, as indicated in the diagram:
1.100-pin PIM header, compatible with the PIM versions of selected PIC® MCUand dsPIC® DSC devices
2.Direct 7-30V DC power input that provides +3.3V and +5V (regulated) to theentire board
3.Power indicator LED will represent what voltage is applied to the processor PIM.
4.USB connector for connectivity with MCUs that have a USB module
5.Standard 6-wire In-Circuit Debugger (ICD) connector for connections to anMPLAB® ICD programmer/debugger module
6.Push button switches for device Reset and user-defined inputs
7.Potentiometer for analog input
8.Eight indicator LEDs
9.Edge connector for PICtail™ Plus card compatibility
10.Six-pin interface for the PICkit™ Programmer
11.Two Pmod interfaces
12.Four mikroBUS™ headers

圖2.汽車網絡開發板正面圖

圖3.汽車網絡開發板背面圖

圖4.汽車網絡開發板框圖

圖5.汽車網絡開發板電路圖(1):mikroBUS接口

圖6.汽車網絡開發板電路圖(2):PIM連接和分線