TI公司的DS90UB964-Q1是多功能攝像頭集線器,可通過FPD-Link III接口連接4個獨立視頻數據流所收到的串行攝像頭數據,與DS90UB913A/913Q串行器相結合時,可接收來自100萬像素圖像傳感器的數據,并在30Hz或60Hz幀速率下支持720p/800p/960p分辨率,主要用在汽車ADAS系統如環視系統,照相機監視系統,傳感器融合以及安全和監視系統.本文介紹了DS90UB964-Q1主要特性,功能框圖,應用電路框圖以及評估模塊DS90UB96X-Q1EVM主要特性,電路圖,材料清單和PCB設計圖.

The DS90UB964-Q1 is a versaTIle camera hubcapable of connecTIng serialized camera datareceived from 4 independent video datastreams viaan FPD-Link III interface. When coupled withDS90UB913AQ/913Q/933Q serializers, theDS90UB964-Q1 receives data from 1-Megapixelimage sensors supporTIng 720p/800p/960p resolutionat 30-Hz or 60-Hz frame rates. Data is received andaggregated into a MIPI CSI-2 compliant output forinterconnect to a downstream processor. A secondMIPI CSI-2 output port is available to provideadditional bandwidth, or offers a second replicatedoutput.

The DS90UB964-Q1 includes 4 FPD-Link IIIdeserializers, each enabling a connection via costeffective50-Ω single-ended coaxial or 100-Ωdifferential STP cables. The receive equalizerautomatically adapts to compensate for cable losscharacteristics, including degradation over time.

Each of the FPD-Link III interfaces also includes aseparate low latency bi-directional control channelthat conveys control information from an I2C port andis independent of video blanking period. Generalpurpose I/O signals such as those required forcamera synchronization and functional safetyfeatures also make use of this bi-directional control channel.

DS90UB964-Q1主要特性:

1• Qualified for Automotive Applications

• AEC-Q100 Qualified With the Following Results:

– Device Temperature Grade 2: –40℃to +105℃

Ambient Operating Temperature Range

– Device HBM ESD Classification Level ±4 kV

– Device CDM ESD Classification Level C6

• Aggregates Data From up to 4 Cameras OverFPD-Link III Interface

• Supports 1-Megapixel Sensors With HD720p/800p/960p Resolution at 30-Hz or 60-Hz

Frame Rate

• Multi-Camera Synchronization

• MIPI DPHY Version 1.2 / CSI-2 Version 1.3Compliant

– 2× CSI-2 Output Ports

– Supports 1, 2, 3, 4 Data Lanes per CSI-2 port

– CSI-2 Data Rate Scalable for 400 Mbps / 800Mbps / 1.5 Gbps / 1.6 Gbps each Data Lane

– Programmable Data Types

– Four Virtual Channels

– ECC and CRC Generation

• Supports Single-Ended Coaxial or ShieldedTwisted-Pair (STP) Cable

• Adaptive Receive Equalization

• I2C With Fast-Mode Plus up to 1 Mbps

• Flexible GPIOs for Camera Sync and FunctionalSafety

• Compatible With DS90UB913AQ/913Q/933QSerializers

• CRC protection on the internal Data Path

• ISO 10605 and IEC 61000-4-2 ESD Compliant

DS90UB964-Q1應用:

• Automotive ADAS

– Surround View Systems

– Camera Monitoring Systems

– Sensor Fusion

• Security and Surveillance

圖1.DS90UB964-Q1功能框圖

圖2.DS90UB964-Q1典型應用電路框圖

圖3.DS90UB964-Q1典型連接圖(同軸)

評估模塊DS90UB96X-Q1EVM

The Texas Instruments DS90UB96X-Q1EVM evaluation module (EVM) is a functional board design forevaluating the FPD-Link III Deserializer to MIPI CSI-2 ADAS (Advanced Driver Assistance Systems) Hub.

This kit will demonstrate the functionality and operation of the DS90UB96X-Q1 family of chipsets. Theinformation provided in this document can be applied to devices such as DS90UB964-Q1. This EVM canalso be used as a hardware reference design for any implementation of the DS90UB96X-Q1 series. Someportions and components in the EVM or in this document may include the references to DS90UB964-Q1instead of addressing all part numbers. For the purposes of this document, the DS90UB964-Q1 is interchangeable with the DS90UB96X-Q1.

The DS90UB96X-Q1 is a versatile camera hub capable of connecting serialized camera data receivedfrom up to 4 independent video datastreams via an FPD-Link III interface using standard coaxial cables.When coupled with DS90UB913A/913Q serializers, the DS90UB964-Q1 receives data from 1-Megapixelimagers supporting HD 720p/800p/960p resolution at 30/60Hz frame rates. The DS90UB96X-Q1 mergesand manages multiple data streams into a MIPI CSI-2 compliant output for interconnect to a downstreamprocessor.

The EVM is a development add-on module to add surround view capability to any of a variety of videoprocessor systems such as the TI TDA3x ADAS Processor, or an Applications Processor, Image SignalProcessor (ISP), and SOC. The system consists of four cameras each of which receives controlinformation and power through FAKRA coaxial cables, and uses the same cable to return the videoinformation to an EVM board. Each of the FPD-Link III interfaces also includes a separate low latency bidirectionalcontrol channel that conveys control information from an I2C port. General purpose I/O signalssuch as those required for camera synchronization and functional safety features also make use of this bidirectionalcontrol channel.

The Texas Instruments DS90UB96X-Q1EVM helps to evaluate the operation and performance of theDS90UB964-Q1 and is available for order in two variants.

評估模塊DS90UB96X-Q1EVM主要特性:

• Aggregates data from up to 4 cameras over FPD-Link III interface

• Supports 1-Megapixel sensors with HD 720P/800P/960P resolution at 30/60Hz frame rate (paired w/DS90UB913A)

• Multi-camera synchronization

• Supports MIPI DPHY 1.2/CSI-2 Version 1.3 compliant

– 2x CSI-2 output ports

– Supports 1, 2, 3, 4 data lanes per CSI-2 port

– CSI-2 data rate scalable for 400 Mbps/800 Mbps/1.6 Gbps per data lane

– Programmable data types

– Four Virtual Channels

– ECC and CRC generation

• Supports Single-ended Coax cable and Power Over Coax

• Adaptive receive equalization

• I2C with Fast-mode Plus up to 1 Mbps

• Flexible GPIOs for camera sync and functional safety

• Single +12V power supply for EVM

評估模塊DS90UB96X-Q1EVM主要元件:

• DS90UB964-Q1

• On-board Power-over-Coax (POC) interface

• Four Fakra coax connectors for digital video, power, control and diagnostics

• Samtec QSH type connectors on CSI-2 interfaces

• On-board I2C programming interface

圖4.評估模塊DS90UB96X-Q1EVM外形圖

圖5.評估模塊DS90UB96X-Q1EVM典型配置圖

圖6.評估模塊DS90UB96X-Q1EVM電路圖(1)

圖7.評估模塊DS90UB96X-Q1EVM電路圖(2)

圖8.評估模塊DS90UB96X-Q1EVM電路圖(3)

圖9.評估模塊DS90UB96X-Q1EVM電路圖(4)

圖10.評估模塊DS90UB96X-Q1EVM電路圖(5)

圖11.評估模塊DS90UB96X-Q1EVM電路圖(6)

圖12.評估模塊DS90UB96X-Q1EVM電路圖(7)

裝配SV601176-001的評估模塊DS90UB96X-Q1EVM材料清單:

裝配SV601176-002的評估模塊DS90UB96X-Q1EVM材料清單:
 

圖13.評估模塊DS90UB96X-Q1EVM PCB設計圖(頂層)

圖14.評估模塊DS90UB96X-Q1EVM PCB設計圖(頂層焊接圖)

圖15.評估模塊DS90UB96X-Q1EVM PCB設計圖(頂層1)

圖16.評估模塊DS90UB96X-Q1EVM PCB設計圖(層2)

圖17.評估模塊DS90UB96X-Q1EVM PCB設計圖(層3)

圖18.評估模塊DS90UB96X-Q1EVM PCB設計圖(層4)

圖19.評估模塊DS90UB96X-Q1EVM PCB設計圖(層5)

圖20.評估模塊DS90UB96X-Q1EVM PCB設計圖(底層6)

圖21.評估模塊DS90UB96X-Q1EVM PCB設計圖(底層焊接圖)

圖22.評估模塊DS90UB96X-Q1EVM PCB設計圖(底層)